Car Installations and Repair

Things are becoming expensive day by day and so are the car accessory installments and their repair. Services are becoming costlier to customize our car, so it is time we do it ourselves as it is an easy task.

Car alarm repair:

Car alarms can get annoying at times when it keeps going off accidently when a passerby touches or just walks by it. Blaring auto alarms need repair since they cause a lot of parking scenarios.
All you need to do is to find out what your alarm is particularly triggered by. Generally in most of the cars they are triggered by a small vibration explaining why they go off when a passerby just happens to touch the car. So all you need to do is to recalibrate the vibration trigger to be less sensitive.

Car amplifier installation:

Amplifier helps us boost the stock audio output provided by car stereo and transport them to different channels. Amplifier is a must add-on if one is fond of music, but then who is not.
Amplifier installation is not that hard a process. The following things are required before you start the process: An amplifier (assuming that your car already has a stereo) , a 2m hard insulated copper wire, inline fuse holder, a set of RCA cables,  some speaker wires and wire connectors.

1.  Switch off the car to turn the power off,

2.  Open the bonnet and disconnect the battery connector from the negative terminal.

3.  Attach a hard copper wire having an inline fuse connected to the negative terminal connector.

4.  Take the other end of this wire and slide it through the opening to the car’s cockpit.

5.  Run this wire through the carpet, to underneath the front passenger seat, where the amplifier will be placed. Remember that the amplifier is placed between the speakers and the head unit i.e the stereo.  

6.  This wire is then connected to the ‘GROUND’ input marked on the amplifier. Similarly the wire needs to be connected to the positive terminal of the battery, brought inside to the ‘B+’ input marked on the Amplifier.

7.  Now take a thin blue wire called the remote wire, connect one side to the blue color remote wire with the back of the car stereo and the other side to the ‘REMOTE’ input marked on the amplifier.

8.  The wires from the speakers need to be connected to the amplifier and to the SPEAKER output connectors marked positive and negative.

9.  For the input of the amplifier you need to run 2 RCA wires from the RCA output behind the car stereo to the RCA input in the car amplifier and adjust the frequency settings in the amplifier as desired.
The setup is now complete. Next connect the Battery wires back to its terminals, close the bonnet, turn on the car and switch on the car stereo.  The amplifier should be working and giving you a better, louder and crisper sound.

Car sub-woofer installation:

Requirements :Minimum 4 channel installed amplifier , a sub woofer and a pair of thin insulated copper wires.

1.  Turn off the car and open the boot. Place the sub woofer inside the boot and connect one side of the insulated copper wire to the sub woofer.

2.  Run this wire to the amplifier and connect the other end to the speaker output bridged connection marked positive and negative on the amplifier. Turn on your car security system and test Sub frequencies.

You can buy your san francisco car alarm installation and car accessories from www.motormusiccarstereo.com. Site offers all above instrument san mateo car navigator installation services in all cities located in state of California, USA including San Francisco, Pacifica, Millbrae, Foster City etc

Car accessory installations

There are several accessories for cars in the market. Customizing cars have become a trend today. For some it is to add a personal touch to their car and for others just a show-off. The installation of these accessories comes out to be quite expensive so here are a few self to do car accessory installations listed below:

CAR ALARM INSTALLATION:

Opening a car lock or door has become just too easy for anyone. It is possible by just using a normal ruler. This has led to an increase in a lot of car thefts. So it has become important to install alarms in cars for their safety and security.
Car alarm installation is a very mazy and complicated process which requires specific knowledge about working with wires. The accessories you require are sirens, LEDs, door opening protection, adjustable shock sensors, and output for parking flash lights, tilt sensors, air horns, door sensors, trunk, hood and door pins, and starter disable relays. For installation: Firstly, choose a suitable place where you can place your alarm, dash light, siren, reset switch. Then collect materials like solder gun, test light, knife, double sided mounting tape and voltmeter. Now read the installation manual carefully which comes with the alarm. The important things to be careful about are LED positioning, placement of the alarm module and the wiring. If these three are done correctly your alarm will function properly.

CAR STEREO INSTALLATION:

If the car stereo installation professionals charge you a good deal of money then let me tell you that you can do this job all by yourself. It is not as difficult a task as it seems to be. All you need is wire cutters, wire stripper, electrical tape, screw wire set and a new car stereo.
Once you have these you are ready to install your stereo.
Firstly remove the old stereo and disconnect the ground cable from the battery. Now connect the positive and negative terminal of the battery to the positive and negative terminal of the new stereo respectively. The negative wire should be attached to the metal and should be screwed in the dashboard near the radio. Cabling strap has a connector attached to it and all the wires should be connected to it. Now you can attach the negative cable back to the battery and fix your new stereo.


CAR AUDIO INSTALLATION:

Car audio is an important accessory in the car and car security system for an enjoyable ride since most of the people are fond of music. Installation of the car speakers is not a tough job; all you need is a little knowledge and common sense. First of all you need to decide as to where the speakers will be placed. The distance of both the speakers should be at an equal distance from the centre for good quality of voice. Choosing a location for woofers and amplifiers is comparatively easy. Wiring is another important part of the installation; you need to buy a correct cable according to the capacity of the amplifier and speakers. A final fine tuning which can be done with the help of the professionals and your installation is done.

You can buy your car accessories and Car Stereo installation Santa Clara from www.motormusiccarstereo.com. Site offers all above instrument car alarm installation Colma services in all cities located in state of California, USA including San Francisco, Pacifica, Millbrae, Foster City etc

Installing a Car Alarm System in Simple Easy To Do Steps

Installing the alarm system in your car is a complex process, especially if you have never done it before. Nevertheless, considering that a number of alarm systems these days come with easy to install options as well as a detailed installation guide, you can undertake the installation on your own easily. However, if you are not used to handling tools, do not take a chance with your expensive car and choose an efficient San Francisco car alarm install center to have the alarm system installed. For car music system, you can choose a South San Francisco car stereo installation center. Here are easy steps that can help you with car alarm installation. iPod car installation and Burlingame car navigator system can also be installed with ease.

Understand your car and assimilate required tools

To begin with, understand the way your car has been built. The easiest way is to obtain diagrams of the car’s layout so that you can check out the wiring system. This is important because every car comes with slightly different wiring system. Although the user manual is useful, to have a precise idea about the wiring of your car is helpful. Secondly, get the required tools. Screwdrivers, cutting pliers, screws and a drill are adequate.  This is common for installation of Burlingame car navigator and iPod car installation.

Mounting the siren

For mounting the siren, find the mounting area, which is usually below the hood of your car or in the inner fender. You will have to undo the panels covering it in order to place the siren out of sight. The siren should not be close to heat sources such as heater cores, radiators and exhausts. Maintain a distance of at least one and a half feet between the heat source and exhaust. The speaker of the siren should face downwards in order to protect it from water damage. The surface behind the chosen spot should not contain wiring because you need to drill screws into it which might cause damage to the wiring. The siren can be mounted with nuts, bolts and screws.

Fix the wiring

The next step is to drill into the rubber firewall so that the wire of the siren can be passed through the hole to the back seat. The power line of the alarm system should be close to the battery. A fuse wire needs to be attached. Using screws, nuts and bolts, the control module should be mounted under the steering column below the dashboard.

Fix the LED display

You can drill into the dashboard to fix the LED screen. The wiring will also pass through the hole to connect the screen. A mounting tape can be used to secure the LED indicator.

Secure indicators

Identify the wires that are connected to door lighting and power locking system. A sensor should be connected to these wires. All input and output wires should be attached to the alarm module.

Finishing

You will find a lot of wire in the car. Just bundle them and secure them under the dashboard. Finally, connect the power input wire to the car battery and south san francisco car stereo.

South San Francisco car stereo and San Francisco car alarm install centers can be helpful in installing car accessories. A good store to buy your car accessories is  http://www.motormusiccarstereo.com/. You can purchase high quality accessories such as Burlingame car navigator and iPod car installation kit from the store.

Car Audio Installation - DIY or Professional Help

If you own a car or planning to buy one, then two things you have keep in mind are; car alarm system and car audio installation. With these two in place, issues of in car entertainment and security of the car are both addressed. In case of new cars available now, both these car audio system and car alarm system come as standard accessories and are factory installed. In San Francisco car alarm installation professionals do a wonderful job of installing these systems if you wish other company products and not the inbuilt ones.

Car Audio System

In case of low end and old cars, what you get is only a car radio. If you want to enjoy good music, then you have to go for retrofitting of an audio system of your choice. You can install the system yourself or if not well conversant with the job, you can employ the services of a car audio installation professional.

If you plan to install the system yourself, the advantages are many. You can save on time and the cost of installation. You also get the satisfaction of doing a technical job all by yourself. You can also learn plenty of information about wiring job which comes in handy in future if there is any problem with the system.

If you are doing the installation all by yourself, then you have to take few precautions. While handling the tools, you must be careful not to damage the expensive system. The slot provided for fixing the earlier radio may or may not suit the new system and if it is not matching, then you have to either file the slot to the exact size required or if the slot is bigger, provide gasket or some other type of filler to have a snug fit.

Another problem commonly encountered in car audio installation is identifying the correct wiring, but it may not pose much of a problem in some models, as these cars come with sockets and plugs which fit in only in one direction, thus eliminating the risk of wrong connection of wires. In case you are not keen on doing the job yourself, you can search for professionals who can match the experience and expertise similar to Burlingame car stereo installers.

As far speaker installation is concerned, if the shape and size of the new speakers do not match with the existing speakers, then additional work in the form of reshaping the speaker slot is required.

If you do not want to undergo all these exercises and if you are residing in or near Burlingame then you can entrust the job to Burlingame car stereo installers.


Car Alarm Installation

With increased instances of car theft it is wise to install a car alarm system. Luxury and high end cars have this installed as original equipment. Here also, you can either do it yourself or assign the job to experts. If you are a resident of San Francisco, you can hand over the installation work to pacifica car audio installation professionals.

If you are a music lover and want to enjoy good music then go for a good car audio installation done on your car. In Burlingame car stereo is installed by experts who have many years of service in the field. Equally important for your vehicle is a car alarm system which protects your car in case of attempted theft. If you happen to be in San Francisco car alarm installation can be entrusted to professionals who will do a neat job. All car accessories can be found in  http://www.motormusiccarstereo.com/.

Car Navigation Systems – Making the Choice between Stores Bought Model and Professionally Installed One

Most of the cars these days come with built-in car audio and navigation systems. So, it is often confusing as to whether to keep the same system or have the car equipped with a professionally installed one. Both kinds of systems have their benefits. This confusion arises with every accessory in the car, be it the car alarm installation or installation of high power audio systems. Read on below for certain details and pointers that can help you make the choice between the two.

One of the major differences between a store bought model and professionally installed one is in the features. A store bought model usually comes with limited features. It works for all basic navigation purposes. However, if you are a regular traveler and would like more functional features, you should go in for a professionally installed car navigation system. With excellent features such as traffic warnings, text to speech feature, speech recognition, speed warnings and others, these navigation systems guide you safely through unknown terrains.  Different models come with different features. You can check out some of the models online and obtain the best installation services from South San Francisco car navigator installation services in order to find ones that you find suitable for your requirements. These professional services ensure that the aesthetic appeal of your car is maintained while equipping it with latest state of the art accessories. You can also go in for iPod car installation. These are convenient while being highly functional.

In order to increase the functionality of car accessories and to increase the aesthetic appeal of the car, several accessories are integrated into one. You can have such systems installed by South San Fracisco car navigator installation centers. Navigation systems are integrated along with car alarm installation. Several car audio systems come with in-dash navigation systems. They are also integrated with car alarm installation. You can obtain high quality services at pacifica car audio installation centers.

When you are looking for a car navigation system with mire number of features, you have a couple of choices. You can either have another system installed or can use a mobile system. Here, ease of use comes into play. If you choose a mobile or portable car alarm system or car navigation system, you have to plug it in every time you use the car. Further, since it rests on the dash board, the chances are high that the system falls during uneven drives. Such mundane problems can be eliminated when you choose professional installation services. South San Francisco car navigator installation services ensure that the navigation systems of your choice are fixed in the manner you like and in the places that you want. So, they are very convenient. For all multi-purpose audio installation services, you can choose to have them installed in pacifica car audio installation centers.

Navigation systems, audio systems and car alarm systems are some of the basic requirements in a car. By choosing professional installation of these components in efficient South San Franciso car navigator installation centers or pacifica car audio installation centers, you can have all the components installed to perfection.






Professionally installed systems at South San Francisco car navigator or pacifica car audio installation centers give you the best performance. You can choose among the different kinds of car alarm installation and iPod car installation systems at http://www.motormusiccarstereo.com/.

Make your journey pleasant with a car audio installation!

Any car owner would want to have the best audio system in his car, but factory installed audio systems are not up to the mark and thus arises a need to change the old audio system. A car audio installation can be done either by a professional person or you can take the initiative in installing it.

If you are installing the car audio system, it is necessary to keep in mind that you are handling your expensive car as well as your costly audio system. Careless handling might harm your audio system as well as your car. A professional can do the custom car installation quickly and safely since a car audio system is not just a single unit, but comprises of a stereo, amplifiers, speakers, sub-woofers and other minor units.

Simple tips to install a car audio system

1.  It is generally assumed that a large stereo system can give better sound quality and clarity. While the truth is, size of audio system does not matter. Even a small but efficient car audio installation can give the best acoustic performance and hence it is advisable to purchase a system that best fits your car.

2.  Go through the instruction manual since each car model and speaker system differs from the other.

3.  Once you have zeroed down on the  audio system to be installed, next basic step  of car audio installation is connecting the receiver to the car through wiring. But, before beginning to connect these wires, turn off the negative battery to prevent short-circuits. Connect the battery according to the wiring diagram or go according to the color coding of wires.

4.  Decide on the number of speakers that need to be connected to the amplifier. Placing the speaker at the right place is of utmost importance. Make sure there is sufficient gap between two speakers depending upon the available car space.

5.  Function of speakers also depends on enclosures provided. Different types of enclosures produce different types of sound quality.

6.  An audio system cannot work without power. For this, you need the right amplifier. To produce maximum power output, use a high-grade wire connector and proper wire size. It is always better to purchase an amplifier with a heat-sink, as it absorbs the heat produced by the amplifier. If you are planning for multiple car stereo amplifiers, then go for an amplifier that has a pre-amp output. Another important point to be noted while purchasing the amplifier is its compatibility with the ratings of your sub-woofers and speakers.

7.  If you want to enhance the low notes of your music, then you need a sub-woofer. Right enclosure of sub-woofers provides the best effect.

You can enjoy your journey listening great music, and have a hassle free car audio installation experience by keeping all the aforementioned points in mind.

Other custom car installations:

The major reason behind installing a car alarm system is to keep your car safe from theft. Another benefit of car alarm installation is you got to pay lower insurance premium during car insurance policies.

Owing to its convenience and simplicity, south san francisco car navigator is becoming a necessity s. With a GPS in your car, you can reach any destination in an unknown territory at ease. Driving experience have been made safe, easy and enjoyable with these custom car installations.

A car audio installation by a professional can save your money and time.. If you want your car to stay away from theft, then it is always better to go for a car alarm installation. Also, make your travel convenient and hassle free by installing GPS car navigation system, Get all the services and accessories needed for a custom car installation at http://www.motormusiccarstereo.com/.

A Breezy Way for Car Stereo Installation

If you are a music lover, then a factory stereo system will not satisfy your music thirst. You might want to upgrade it or replace with a better one, and if you are hesitant about approaching a professional owing to cost, you might as well do a car stereo installation all by yourself.
Before starting with your car stereo installation, it is important to choose the right car stereo system that will be apt for your car. For installation, you need certain basic tools such as screwdrivers, socket wrench, wire cutters, wire strippers, electrical tape and wire ties.


Easy Installation steps

1.    Unfix the old factory stereo using the screw driver. First remove the front panel and then the second panel. Remove any screws or bolts that attach the radio to the car.

2.    The most important part while doing a car stereo installation is to disconnect the car’s negative battery and other power issuing cables to avoid any short-circuits.

3.    After unplugging, mounting the new stereo is the next part of installation. There are two types of mounting, ISO mounting and ring mounting. In an ISO mounting, the new system can be replaced smoothly into the previous radio brackets. Whereas, in a ring mounting, the whole bracket has to be altered using the kit, and the system has to be placed.

4.    Now, connect cables of the new stereo system.

5.    Your car audio installation is completed by re-connecting unplugged cables and the negative battery terminal.

Few tips during car audio installation

1.    Go through the instruction manual before you begin with the car audio installation.

2.    Connect the Yellow wire to the fuse box; dark blue wire to the power antenna, dark blue with white wire should be connected to the remote amplifier and while the orange one is to be connected to the wire with voltage to switch on the lights.

3.    If you want maximum effect of speakers, then make sure there are no gaps or holes while fixing new speakers to the old factory location.

4.    Find a suitable amplifier and fix it in the right place. Since amplifiers generate heat, it is better to fix it in a place where it can transmit its heat.

Doing the car audio installation all by yourself gives a kind of satisfaction.

Other accessories to install:


Install GPS navigation system to your car and make your travel safer, especially when traveling in an unknown territory. Installing GPS navigation gives you information about the position of the car and also gives you the best route to take while traveling.

Earlier, iPod car installation was a tedious task, but now it has become one of the easiest jobs to do. If you have the right signal transfer, a proper power supply and a car mount, you can securely install your iPod to your car. You can listen to your collection of songs while driving.

A car stereo installation needs careful handling as it might harm your system and your car, if mishandled. Custom installations like car audio installation, GPS navigation, car TV installation and iPod car installation can give the best output only if they are installed in the right way. All parts that are required for these installations are available at http://www.motormusiccarstereo.com/.