Car Installations and Repair

Things are becoming expensive day by day and so are the car accessory installments and their repair. Services are becoming costlier to customize our car, so it is time we do it ourselves as it is an easy task.

Car alarm repair:

Car alarms can get annoying at times when it keeps going off accidently when a passerby touches or just walks by it. Blaring auto alarms need repair since they cause a lot of parking scenarios.
All you need to do is to find out what your alarm is particularly triggered by. Generally in most of the cars they are triggered by a small vibration explaining why they go off when a passerby just happens to touch the car. So all you need to do is to recalibrate the vibration trigger to be less sensitive.

Car amplifier installation:

Amplifier helps us boost the stock audio output provided by car stereo and transport them to different channels. Amplifier is a must add-on if one is fond of music, but then who is not.
Amplifier installation is not that hard a process. The following things are required before you start the process: An amplifier (assuming that your car already has a stereo) , a 2m hard insulated copper wire, inline fuse holder, a set of RCA cables,  some speaker wires and wire connectors.

1.  Switch off the car to turn the power off,

2.  Open the bonnet and disconnect the battery connector from the negative terminal.

3.  Attach a hard copper wire having an inline fuse connected to the negative terminal connector.

4.  Take the other end of this wire and slide it through the opening to the car’s cockpit.

5.  Run this wire through the carpet, to underneath the front passenger seat, where the amplifier will be placed. Remember that the amplifier is placed between the speakers and the head unit i.e the stereo.  

6.  This wire is then connected to the ‘GROUND’ input marked on the amplifier. Similarly the wire needs to be connected to the positive terminal of the battery, brought inside to the ‘B+’ input marked on the Amplifier.

7.  Now take a thin blue wire called the remote wire, connect one side to the blue color remote wire with the back of the car stereo and the other side to the ‘REMOTE’ input marked on the amplifier.

8.  The wires from the speakers need to be connected to the amplifier and to the SPEAKER output connectors marked positive and negative.

9.  For the input of the amplifier you need to run 2 RCA wires from the RCA output behind the car stereo to the RCA input in the car amplifier and adjust the frequency settings in the amplifier as desired.
The setup is now complete. Next connect the Battery wires back to its terminals, close the bonnet, turn on the car and switch on the car stereo.  The amplifier should be working and giving you a better, louder and crisper sound.

Car sub-woofer installation:

Requirements :Minimum 4 channel installed amplifier , a sub woofer and a pair of thin insulated copper wires.

1.  Turn off the car and open the boot. Place the sub woofer inside the boot and connect one side of the insulated copper wire to the sub woofer.

2.  Run this wire to the amplifier and connect the other end to the speaker output bridged connection marked positive and negative on the amplifier. Turn on your car security system and test Sub frequencies.

You can buy your san francisco car alarm installation and car accessories from www.motormusiccarstereo.com. Site offers all above instrument san mateo car navigator installation services in all cities located in state of California, USA including San Francisco, Pacifica, Millbrae, Foster City etc

Car Audio Installation - DIY or Professional Help

If you own a car or planning to buy one, then two things you have keep in mind are; car alarm system and car audio installation. With these two in place, issues of in car entertainment and security of the car are both addressed. In case of new cars available now, both these car audio system and car alarm system come as standard accessories and are factory installed. In San Francisco car alarm installation professionals do a wonderful job of installing these systems if you wish other company products and not the inbuilt ones.

Car Audio System

In case of low end and old cars, what you get is only a car radio. If you want to enjoy good music, then you have to go for retrofitting of an audio system of your choice. You can install the system yourself or if not well conversant with the job, you can employ the services of a car audio installation professional.

If you plan to install the system yourself, the advantages are many. You can save on time and the cost of installation. You also get the satisfaction of doing a technical job all by yourself. You can also learn plenty of information about wiring job which comes in handy in future if there is any problem with the system.

If you are doing the installation all by yourself, then you have to take few precautions. While handling the tools, you must be careful not to damage the expensive system. The slot provided for fixing the earlier radio may or may not suit the new system and if it is not matching, then you have to either file the slot to the exact size required or if the slot is bigger, provide gasket or some other type of filler to have a snug fit.

Another problem commonly encountered in car audio installation is identifying the correct wiring, but it may not pose much of a problem in some models, as these cars come with sockets and plugs which fit in only in one direction, thus eliminating the risk of wrong connection of wires. In case you are not keen on doing the job yourself, you can search for professionals who can match the experience and expertise similar to Burlingame car stereo installers.

As far speaker installation is concerned, if the shape and size of the new speakers do not match with the existing speakers, then additional work in the form of reshaping the speaker slot is required.

If you do not want to undergo all these exercises and if you are residing in or near Burlingame then you can entrust the job to Burlingame car stereo installers.


Car Alarm Installation

With increased instances of car theft it is wise to install a car alarm system. Luxury and high end cars have this installed as original equipment. Here also, you can either do it yourself or assign the job to experts. If you are a resident of San Francisco, you can hand over the installation work to pacifica car audio installation professionals.

If you are a music lover and want to enjoy good music then go for a good car audio installation done on your car. In Burlingame car stereo is installed by experts who have many years of service in the field. Equally important for your vehicle is a car alarm system which protects your car in case of attempted theft. If you happen to be in San Francisco car alarm installation can be entrusted to professionals who will do a neat job. All car accessories can be found in  http://www.motormusiccarstereo.com/.